Skip to content
Click Here To Register A Trade Account Now
Click Here To Register A Trade Account Now

Monitor Audio CW10 10" Custom Install Subwoofer

Sold out
Original price £666.66
Original price £666.66 - Original price £666.66
Original price £666.66
Current price £500.00
£500.00 - £500.00
Current price £500.00

The new Monitor Audio CW10 places all the power in the hands of installer and client.

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.


  • Ultra-compact ‘cube’ shape designs

  • Twin side-mounted ABRs for increased output and reduced distortion. Higher output than a sealed box and better control and zero air noise compared to a ported box

  • High excursion woofers featuring signature C-CAM cone technology

  • High-power Class-D amplifier delivering 400 watts

  • DSP processing –all functions performed in the digital domain for precise control

  • RS-232 for integration with system controllers

  • SubConnect’ PC Applet for full feature adjustment, installer set-up and firmware update using USB

  • LFE Balanced XLR and unbalanced RCA Inputs

  • Stereo RCA line level inputs

  • Phase switch (0-180 degrees)

  • 12V trigger and auto signal sensing with timer control

  • 4 x pre-set equalisations optimised for music, movie, flat and impact with customisation through SubConnect Applet

  • Robust metal mesh grille on front woofer

  • Rigid MDF cabinet construction with durable vinyl finish

Technical Specifications

System Format: Active sub-woofer system – twin ABR. 18mm MDF cabinet (CARB2 approved)

Low Frequency: Limit 32Hz (-6dB)

Amplifier Power Output:400W RMS @ < 1% THD+N

Maximum SPL: 105.8dBA

Amplifier Classification: Class D amplifier with Switch mode power supply (SMPSU)

Inputs Stereo: RCA LFE (RCA) LFE Balanced (XLR)

EQ Profiles: Flat/ Music/ Movie/ Impact

Phase Control: 0 & 180 degrees

Auto Sensing: LFE Input <2mV Auto wireless audio input signal detection

Auto Standby: After approximately 15 minutes if no signal sensed Wireless audio source turned off

Driver Compliment: 1 x 10” (250mm) C-CAM® long throw driver, 2 x 10” (250mm) ABR

Input Impedance: > 20KΩ

Mains Input Voltage: 110 - 120 Vac / 220 - 240 Vac 50/60Hz (Manual Switch selection)

Dimensions: (H x W x D) (Inc fitted feet): 315 x 305 x 320mm 12 3/8 x 12 x 12 5/8”

12V Trigger Input: 5 - 12V via 3.5mm mono mini-jack socket

Power Consumption Standby: < 0.5W (ErP approved) Typical Idle: < 10W Max Rated: 400Wv